There are over 4,000 paint colors to choose from. These can either have a flat or satin finish, depending on what sheen you prefer. Be sure to ask about our free color consultation, and as always we provide free paint for you to try on your colors before our painters arrive!
A new paint color can literally change the entire look of a room; it is also often the most cost efficient way to remodel and update your home.
Many home owners that have larger wall areas choose a modern taupe color or decide to accent specific walls with a deep dark color. The choice is yours, the color possibilities are endless!
No matter the age of your current paint color, we will make sure the drywall is smooth and professional looking before we start painting, so the final paint product is rich and luxurious.
Painting the Exterior of Your Home - A fresh coat of house paint may be your last chance to protect the exterior of your home from moisture and impending wood rot that often takes place in our tough seasons. Failing to take the necessary steps to protect your home can be very costly. If a home goes unpainted through the seasons you may end up with extensive wood damage thatould cost thousands to repair. The easiest way to prevent this is with a fresh coat of paint before winter weather sets in. A good paint job with quality paints could protect the exterior of your home for ten years or longer.
Painting your home is also the most cost effective home remodeling project that can be done. Imagine, for a nominal cost, completely changing the colors and look of your home. We have painted homes with modern, updated hues and colors and friends who have come to visit the homeowners, have driven right by! Check out these amazing before and after photos. Read about the three things we can do to help you pick the best color for your home, all these services are FREE for our customers.
Contact Rangwala Mumbai today to discuss protecting your home from wood rot and the types of paint we can use to paint your house into the fall. We can schedule a free estimate for you right away!
Most projects will be professionally prepared including power washing, caulking, scraping and priming prior to any final coats of quality paint.
House Preparation Includes
1. Washing surfaces we are going to paint to clean prior to painting.
2. Spreading tarps and drop cloths areas to protect them from drips.
3. Covering all all windows, light fixtures and other areas that will not be painted.
4. Scraping all loose paint and priming bare wood areas.
5. Caulking all gaps where wood meets wood up to 1/4".
6. Completing any wood replacement or additional caulking.
Wood finishing refers to the process of embellishing and/or protecting the surface of a wooden material. The process starts with surface preparation, either by sanding by hand (typically using a sanding block or power sander), scraping, or planing. Imperfections or nail holes on the surface may be filled using wood putty or pores may be filled using wood filler. Often, the wood's colour is changed by staining, bleaching, ammonia fuming and a number of other techniques. Some woods such as pine or cherry do not take stain evenly, resulting in "blotching". To avoid blotching, a barrier coat such as shellac or "wood conditioner" is applied before the stain. Gel stains are also used to avoid blotching.
Once the wood surface is prepared and stained, a number of coats of finish may be applied, often sanding between coats. Commonly used wood finishes include wax, shellac, drying oils (such as linseed oil or tung oil), lacquer, varnish, or paint. Other finishes called "oil finish" or "Danish oil" are actually thin varnishes with a relatively large amount of oil and solvent. Water-based finishes can cause what is called "raising the grain" where surface fuzz emerges and requires sanding down.
Finally the surface may be polished or buffed using steel wool, pumice, rotten stone and other polishing or rubbing compounds depending on the shine desired. Often, a final coat of wax can be applied over the finish to add a slight amount of protection.
French polishing is not polishing as such, but a method of applying many thin coats of shellac using a rubbing pad, yielding a very fine glossy finish.
Our Industrial Painting Services includes painting of the interior as well as exterior areas of factories and industrial units. The factory premise is thoroughly inspected before commencing the work and clients' specifications are also followed. Our customized approach and use of latest tools and paints ensure that the work is done as per international quality standards. Clients can choose the most viable and cost effective option for them out of our service range.
The first coat of sand faced cement plaster is done with cement mortar in
1:4 with coarse sand after curing the plaster for seven days the second
coat of cement plaster 1:3 ratio will be done on the first coat.
Sponge is used in the second coat and it is applied when the second
coat is wet, it is thus worked that the density of sand grain appear on surface is equal
The surface is kept well watered at least for 15 days.
B. Smooth cast plaster or plain face plaster :
This finish is just similar to sand faced finish except fine grained sand is used instead of coarse sand.
Before an interior painting project, any minor damage to drywall should be repaired. Repairing dents and holes in your walls will provide a finished look to your home and help the paint look better and last longer. Paint will resist chipping and will stay smooth on repaired walls.
We have immense experience and exposure in executing construction assignments from time to time of different cader. In the recent past we have successfully completed projects of MHADA pertaining to Tar Road, Cement Road, Footpath etc. Additionally we have also constructed the Power House for Reliance Energy Ltd (7 feet x 4 Feet). Whether the assignment is small or big equal care, prescision and planning is taken care by us in implementing the project. We are proud to be in this field and known & recommended for our quality work.